UNDERSTANDING FOUNDATION MOVEMENT
Causes Of Movement
This illustration shows seasonal soil movement along a slab, and how perimeter piers support the affected area after settlement.
Seasonal soil movement & perimeter support
Illustrative sequence, not a prediction for an individual home. Movement, soil gaps and support details are exaggerated for clarity; elapsed seasons are condensed. Soil profile, pier depth and achievable lift vary by site. Piers do not prevent heaving. Warranty coverage is subject to Accu Pier’s written warranty.
About this illustration
This example follows perimeter movement caused by uneven moisture: localized wetting and heave, drying and loss of support, and settlement that can remain after repeated cycles. Pooling is shown as a source of concentrated wetting; settlement occurs during the drying stages. The supported area stays at its repaired position during the final dry-weather example.
Technical background: ASCE Texas Section, Recommended Practice for the Design of Residential Foundations, Version 2 (2007), Appendix A. Pier installation sequence and warranty wording supplied by Accu Pier.
Loose fill & uneven settlement
Accu Pier field experience: Based on 25 years of field experience, Accu Pier estimates that inadequately compacted fill contributes to more than half of the foundation repair cases it encounters.
Illustrative 10-year scenario supplied by Accu Pier. Right-edge settlement reaches −3.5 inches relative to the center 0.0 reference. Movement and soil texture are enlarged for clarity; actual rates and patterns vary. The final sequence is a separate example of preparation before new construction.
Preparation guidance & builder experience
Use select fill appropriate to the site and foundation design. Place it in specified lifts, adjust moisture, compact mechanically, and verify the required density and moisture before pouring. Fill specifications, lift thickness, moisture range and testing are project-specific.
Accu Pier’s owner recalls that his father, a home builder, watered fill with a sprinkler for three weeks before pouring. This is a historical builder practice, not a universal three-week requirement. Watering or waiting alone does not establish adequate compaction.
Technical background: ASCE Texas Section, Recommended Practice for the Design of Residential Foundations, Version 2 (2007), Appendix B. Scenario and builder experience supplied by Accu Pier.
Pressure-side leak & interior slab movement
Illustrative case, not a prediction for an individual home. The leak rate (about 3 gallons/hour), affected radius (about 15 feet), and 4–6 month interval are supplied scenario details. Movement, moisture spread, floor opening and pier components are enlarged for clarity. Actual soil conditions, drying rate, repair and lift vary by site.
About this illustration
This example follows a pressurized supply-line union that leaks beneath a slab. The water meter supplies two bathrooms and a kitchen. Moisture spreads and swells the clay; the plumber exposes and repairs the union and repours the slab. During this example’s subsequent drying period, a roughly 15-foot-radius area settles. Six interior piers lift and support that area. Flow volume is not the amount retained beneath the slab.
Technical background: ASCE Texas Section, Recommended Practice for the Design of Residential Foundations, Version 2 (2007), Appendix A. Scenario details and pier installation sequence supplied by Accu Pier.
Slow sewer leak & foundation movement
Illustrative five-year scenario, not a prediction for an individual home. The 3-inch sewer line and roughly 6-foot affected width on each side are supplied details. Moisture spread, settlement and pier components are enlarged for clarity. This example shows 16 exterior and 8 interior pier locations on the affected half; placement is illustrative rather than a site-specific repair plan. Achievable lift varies.
About this illustration
This example follows a slow leak at a deteriorated joint of an old cast-iron sewer line. Escaping water tracks along the line and collects against the perimeter beam at one end of the slab. In the illustrated case, persistently wet, weakened soil loses support, and the interior strip and outer beam settle over five years. After a plumbing repair, piers support the affected half of the foundation: exterior first to the 0.0 reference, then eight interior piers lift the inside to match. The 16 exterior and 8 interior locations are schematic.
Technical background: ASCE Texas Section, Recommended Practice for the Design of Residential Foundations, Version 2 (2007), Appendix A. Scenario details and repair order supplied by Accu Pier.
